Ross DVB-S 5010 - Specification; Tuner and Demodulator Specs; MPEG Standards; Connectors and Power Supply

21
11.0Specication
1.Tuner & Demodulator
Input Frequency Range: 950MHz to 2150MHz
RF Input Signal Level: -65dBm to-25dBm
RF Impedance: 75W
RF Impedance: 55MHz/8MHz(Under 5 Msps)
LNB Power: 13/18DC, +/-5%, 0.5Amax,
1.8Apeak overloaded protect
LNB Tone Switch: 22KHz +/- 2KHz, 0.65Vp-p+/-0.15V
DiSEqC Control: V1.0, V1.2,
Demodulation: QPSK
Symbol Rate: 1 ~ 45Msps/SCPC, MCPC
2.MPEG
Transport Stream: MPEG-2 ISO/IEC 13818
      TransportStreamSpecication
Input Rate: Video Max.15Mbit/s
Video: MPEG-2 MP@ML
Audio : MPEG-1/2 Audio Layer1 or layer2
Video Resolution: 720 x 576(PAL), 720 x 480(NTSC)
Audio Mode: Stereo, Dual channel, Joint stereo, Mono
Audio Sampling Frequency: 32/44.1/48KHz
3. Connector
LNB IF input F type, IEC 169-24 Female
Composite/RCA: AUDIO L, R, VIDEO (White, Yellow, Red).
Serial Port Rs232 D-sub male type(max 57.6 Kbps)
4. Power Supply
Input Voltage: 100-240V~, 50/60Hz.
Power Consumption: Max.25W
Weight: Appr. 1.8KG
Operating Temperature: 0
0
C – 40
0
C
StorageTemperature: -40
0
C - 65
0
C