Ross HD DVB-S2 1201 - Check Satellite Signal Reception P8; Fast Channel Set-Up Astra 2 A;B;D;Eurobird; Chosen Satellite Scan; Channel Search 5

The Resolution is changed by pressing the ‘V For’ button on your remote control. Select be-
tween 480p, 576p, 720p, 1080i and 1080P TV Resolutions as required. 1080P is the highest
available resolution for Satellite HD channel reception.
NOTE:TheTVmayickerorthepicturedisappearbrieywhenchangingresolution
• Make sure your TV source is set to receive the signal from your Receiver.
NOTE:IfyouareusingthisReceiverinconjunctionwithapre-installeddishwhichis
alreadyalignedtoASTRA/EURO1thenaftertheunithaspoweredupyouwillseeTVbeing
displayed.Atthispointpressthe“OK”buttonandyourChannellistshouldbedisplayed
showingalltheprogrammesthatwereloadedontothereceiverduringmanufacture.Your
Receiverisnowreadytouse
4.2.4 Check Satellite Signal Reception
• Press the Menu Button on the Remote Control and select the Channel Search menu
• Press OK to enter the >Channel Search menu, then Select Dish Setup and press OK.
• Your Receiver has a large number of the available Satellites already programmed into it to
make setting up easier for you. You can see the Satellite name at the top left of the OSD
(On-Screen Display).
• Using the VOL+/- Buttons, select the SATELLITE you are aligning your dish to. The default
Is already set to 1.ASTRA 2A,2B,2D which is the Satellite providing the most common Free
to Air English language channels such as BBC 1 ,2, etc.
NOTE:DONOTchangeanyoftheothersettingsontheAntennaSettingMenu,these
havealreadybeenprogrammedintoyourreceiverduringmanufactureattheFactory.
• Now refer back to your “SatelliteDishInstallationGuide” to fine tune your
signal reception.
• Use the Quality level indicator as displayed in the bar towards the bottom of the Dish Setup
Menu to help fine tune reception (try to obtain better than 50% for a basic signal).
4.2.5 Fast Channel Set-Up Astra 2A/B/D/Eurobird 1
This HD Satellite Receiver is pre-programmed with the most popular English Language chan-
nels from the Astra2A/B/D and Eurobird 1 Satellites, so there is no need to scan these chan-
nels. Simply press the Exit button twice to come out of the >Dish Setup menu screen, then
the OK button to go into the channel list. All channels should now be available.
4.2.6 Chosen Satellite Scan
Should you wish to obtain channels from a satellite other than Astra2A/B/D and Eurobird 1,
follow 4.2.4 to check your chosen satellite signal reception strength, then press the BLUE
(Scan) button to scan for channels from your chosen satellite.
For full details on available scanning options go to section 5.1.2
• Your receiver will now scan for all available programmes on your selected Satellite.
This may take several minutes.
• When the Scan has completed, the Programmes will be saved automatically.
• Press EXIT to leave the Installation Menu
• You can now enjoy all the available Programmes on your chosen Satellite.
8