Ross HD DVB-S2 1201 - System Menu P16

5.4.2 System Menu
To prevent unauthorised access of a range of
features on your set top box or to selected
channels. Areas you can restrict access to are –
INSTALLATION LOCK, CHANNEL MANAGER
LOCK, CHANNEL LOCK, MENU LOCK,
RECEIVER LOCK and SYSTEM SETTING LOCK.
You can also change the Parental Control Password to your Receiver (The Factory
Default Password is: 000000). Before you can access any of these features you will be
prompted to enter the Password.
• SetPassword: Press OK to bring up the pop-up menu, input the old, and new
password using the numeric keys, and then repeat again to verify the new password.
Press EXIT to leave the menu.
NOTE:IfyouchangethepasswordREMEMBERtoWRITEDOWNtheNEW
PASSWORDandkeepitsafe.
• FactoryDefault:This enables the User to return the receiver to the settings that were
made in the Factory. It is useful if some changes that you have made have stopped
your Receiver from working properly.
This provides the full FACTORY DEFAULT reset. Press OK, you will then be prompted
to enter the PASSWORD (this is the same as the Parental Control password) and then
finally prompted to confirm that you wish to carry out the reset operation. Press
CANCEL if you have changed your mind or OK to confirm.
NOTE:IfyoucarryoutaFactoryResetItwillrestoreoriginalchannellists,
whichmaybeoutofdateattimeoffactoryreset.
• Information: Press OK to view. Provides details of the Software and Hardware
versions installed in your Receiver.
16