20
• SetasPVRPartition: With this utility you can select the partition that you wish to be the
default location for the PVRRECORD folder and also if desired format that partition. Press
CH+- to select PVR PARTITION SELECT and then press OK. Using the CH+- buttons
select the PARTITION you want to allocate for the PVRRECORD folder, then press OK, the
selected partition will now be where your PVRRECORD folder will be located.
• Format: If you wish you can also format the partition you are going to use as the location
for your PVRRECORD folder. WARNING, USE WITH CAUTION – This will delete all data
from that partition. With your selected partition highlighted press the BLUE (Format Disk)
button. Your disk will now have been formatted.
5.5.2 Software Upgrade
This feature is not currently available but may be utilised in future software versions. To up-
grade the Software please refer to Section “7.0 Software Update”.
5.5.3 Database Backup
This feature enables a back up of all your Channel Information to be taken which can then
be used to restore the information should it become lost or corrupted. The Database Backup
File is always stored in the first partition of the USB Device connected to the rear USB Port in
a folder named “Database”. Press CH+- to select DATABASE BACKUP then press OK. The
back up file will then be created automatically.
5.5.4 Database Update
When you have created a Database Backup file then this feature can be used to update your
Channel Information with your backup data. Press CH+- to select DATABASE UPDATE then
press OK. You will see the top level Directory highlighted. Press OK, you will now see the
folder DATABASE highlighted, press OK. Now, using the CH+- buttons select the most recent
back up file that you created, the format of the file will be “Dbase_20xxxxxxxxxx.bin where the
“x” represents the date of the file. Press OK and your database will be automatically updated.
To Next Page
Loading...
