90 • DashBoard Interface Overview RCP-ME User Guide (v4.0)
Macro Events Tab
The Macro Events tab enables you to configure the macros the hard panel will use.
Figure 16.7 Panel Config — Macro Events Tab
Table 16.8 summarizes the options displayed in the Macro Events tab.
Import Global Labels Imports global labels (a file create and managed by
DashBoard) for the input/output labels
Output/Input Range # Specifies the range of outputs/inputs to view in the
Output/Input Assigns. The Assigns tab will only
display the ranges in blocks of 120 outputs/inputs
at a time, with each block selectable in the list.
Out/In (read-only) # Displays the output/input number
Label Edit or enter a name for the output/input. If you
have configured global labels, the labels can also
be filled in by clicking the Import Global Labels
button.
Table 16.8 Macro Events Tab
Item Parameters Description
Macro # (read-only) # Specifies the macro number
Num. Rows # Specifies the number of events to add to the macro
Update Updates the macro with the number of rows
entered in the Num. Rows field
Event (read-only) # Displays the macro event number. Triggering the
macro will trigger events in this order.
Function Switch Performs a standard crosspoint switch
Macro Performs a macro within the executed macro
Protect Creates a protect condition on the destination of
the selected crosspoint
Table 16.7 Output/Input Assigns Tab
Item Parameters Description
To Next Page
Loading...