Rosslare AC-020 - Page 54

Deleting Proximity Cards/Pin
Codes from the System
1) Press the “*/#” key for 2 seconds
• You will hear a short beep
• The DOOR 2 LED
will turn off
• The DOOR 1 LED
will turn red
DOOR 1 DOOR 2
RED
2) Enter the Programming
Code for confirmation.
(Default code is 1234 for
Door 1 and 4321 for
Door 2.)
?
?
• The DOOR 1 LED
will turn green
• The DOOR 2 LED
will turn off
DOOR 1 DOOR 2
GREEN
?
?
3) Press 8
AC-020 Page 54 03/02
• The DOOR 1 LED
will turn orange
• The DOOR 2 LED
will turn red
DOOR 1
DOOR 2
RED
ORANGE