EasyManua.ls Logo

Rosslare AC-215IP - Normally Closed Input Connection; Normally Open Supervised Single Resistor Input Connection

Rosslare AC-215IP
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Input and Output Connections
AC-215IP Hardware Installation Manual 21
Figure 9: Normally Open Input Connection
4.1.2 Normally Closed Input Connection
Normally Closed Input has two states:
Switch ClosedNormal State:
Loop resistance = 0 (short circuit)
Switch Open Abnormal State:
Loop resistance = Infinite (open circuit)
Figure 10: Normally Closed Input Connection
4.1.3 Normally Open Supervised Single Resistor Input Connection
Connect a resistor of 8.2K in parallel to the input switch contacts.
Normally Open Supervised Input has 3 states:
Switch OpenNormal State:
Loop resistance = 8.2K
Switch Closed Abnormal State:
Loop resistance = 0 (short circuit).
Open circuit across input terminalsTrouble State:
Loop resistance = Infinite (open circuit).

Table of Contents

Related product manuals