Programming the AY-Q64
AY-Q64 Installation and Programming Manual 21
2 = '2' (0x32 hex) 8 = '8' (0x38 hex)
3 = '3' (0x33 hex) 9 = '9' (0x39 hex)
4 = '4' (0x34 hex) *= '* ' (0x2A hex)
5 = '5' (0x35 hex) # = '#' (0x23 hex)
6.3.1.8 1 to 8 Keys BCD, Clock & Data
Buffers up to 8 keys and outputs keypad data without a facility code
like standard Clock and Data card output.
The keypad PIN code can be one to eight digits long. The PIN code
length is selected while programming the reader for Option 8. The
reader transmits the data when it receives the last key press of the PIN
code. The data is sent across the two data output lines as binary data
in Clock & Data format.
If the "* " key or the "#” key is pressed during PIN code entry, the
keypad clears the PIN code entry buffer, generates a beep, and is
ready to receive a new keypad PIN code.
If the entry of the digit keypad PIN code is disrupted and no number
key or "#" key is pressed within 5 seconds, the keypad clears the PIN
code entry buffer, generates a medium length beep and is ready to
receive a new keypad PIN code.
6.4 Selecting Proximity Card Transmission
Format
The AY-Q64 has three different selectable proximity card transmission
formats.
Option 1 – 26-Bit Wiegand
Option 2 – Clock & Data
Option 3 – Wiegand Card + PIN
To Next Page
Loading...
Need help?
General
