Controller Functionality
AYC-Qx4 family manual Page 52
Code for this slot number.
If the code entered is valid the Mode LED will stop flashing and
then the controller is ready for you to enter the next 3-digit slot
number (refer to step 2) that you want to assign a code to, or
press the “#” key to move to the next slot number. If you do not
wish to continue enrolling codes, press the “#” key twice and the
controller will return to Normal mode.
Enrolling Secondary Codes using the Code Search Method
The Code Search feature enables you to quickly enroll a
Secondary Code to a user who already has a Primary Code.
1) Enter the Programming
Mode.
2) Press 7 to enter Menu 7.
• The Door LED will turn
orange
3) Enter 000 as the 3-digit User Slot
number.
• The Door LED will flash
orange.
The controller is now waiting for the Primary Code of the User to
whom you want to add a Secondary Code.
4) Enter the Primary Code belonging to the user for whom you
wish to add a Secondary Code.
7
000
Mode/Transmit
Door/Pro
ram
Green
Mode/Transmit
Door/Program
Oran
e
Mode/Transmit
Door/Program
Oran
e
Mode/Transmit
Door/Program
Red
Oran
e
To Next Page
Loading...
Need help?
General
