Controller Functionality
AYC-Qx4 family manual Page 53
• The Mode LED will flash red.
If the Primary Code entered is not valid, you will hear a long beep
and the AYC-Qx4 will continue to wait for a valid Primary Code.
5) Enter the Code to be used as the Secondary Code.
If the Secondary Code is valid, the controller will beep three times
and return to Normal Mode.
If the Secondary Code is invalid the controller will sound a long
beep, and the AYC-Qx4 will continue to wait for a valid
Secondary Code to be entered.
Deleting Primary and Secondary Codes
There are two methods to delete Primary and Secondary codes:
the Standard Method and the Code Search Method.
When deleting a User Slot, both the Primary Code and the
Secondary code are erased.
Deleting Primary and Secondary Codes using the Standard Method
1) Enter the Programming
Mode.
2) Press 8 to enter Menu 8.
• The Door LED will turn
orange
• The Mode LED will turn red
3) Enter the 3-digit User Slot code you
wish to delete.
• The Mode LED will flash
red Indicating the
controller is waiting for
the Programming Code to confirm the deletion.
8
???
Mode/Transmit
Door/Program
Green
Mode/Transmit
Door/Program
Red
Oran
e
Mode/Transmit
Door/Program
Red
Orange
To Next Page
Loading...
Need help?
General
