Controller Functionality
AYC-Qx4 family manual Page 51
• The Code Search Method is mainly used when enrolling a
user’s Secondary Code and the User Slot Code is
unknown.
The Code Search method only works if a user’s Primary Code is
already enrolled but the Secondary Code is not. (See Enrolling
Secondary Codes using the Code Search Method on page 52.)
Enrolling Primary and Secondary Codes using the Standard Method
1) Enter the Programming
Mode.
2) Press 7 to enter Menu 7.
• The Door LED will turn
orange
3) Enter the 3-digit User Slot number
between 001and 500 that you wish to
enroll a Primary or Secondary code to. For example, User Slot
003 represents User #3.
• If the selected slot has no
Primary Code, the Mode
LED will flash green,
indicating that the controller is ready to accept a Primary
Code.
• If the selected slot
already has a Primary
Code but no Secondary
Code, the Mode LED will flash red, indicating that the
controller is ready to accept a Secondary Code.
• If the selected slot
already has a Primary
and Secondary Code, you will hear a long beep and the
controller will return to Normal Mode.
4) Enter the PIN Code you wish to
assign as the Primary or Secondary
7
???
?
Mode/Transmit
Door/Program
Oran
e
Mode/Transmit
Door/Program
Green
Mode/Transmit
Door/Program
Green
Orange
Mode/Transmit
Door/Program
Red
Orange
Mode/Transmit
Door/Program
Green
To Next Page
Loading...
Need help?
General
