Rotary SPOA3T Series - Trouble Shooting for Operators

8
Down button pressed but lift doesn't lower
Cause
1. Controls not functioning.
1. Incorrect voltage to power unit.
1. Overloading lift.
Remedy
1. Contact service representative for further
assistance.
1. Contact service representative for further
assistance.
1. Check vehicle weight and/or balance
vehicle weight on lift.
2. Contact service representative for further
assistance
Trouble
Press button but nothing
happens.
Motorwon'trunfromeithercolumn.
Motorrunsbutwillnotraiselift.
TROUBLE SHOOTING FOR OPERATORS
Up button pressed but lift doesn't raise
Cause
1. Controls not functioning.
1. Broken latch spring.
Remedy
1. Contact service representative for further
assistance.
1. Contact service representative for further
assistance.
Trouble
Press button but nothing
happens.
Locking latches do not engage.
Down button pressed but lift doesn't lower
Cause
1. Controls not functioning.
Remedy
1. Contact service representative for further
assistance.
Trouble
Press button but nothing
happens.