d04094
page 10 - 9
Jan. 01/2007
Effectivity: 447 SCDI, 503 DCDI,
582 DCDI
OM Edition 1 / Rev. 0
BRP-Rotax
Mixing procedure
STEP no.1: Use a clean approved container
of known volume. To help
predilute the oil, pour a bit of
fuel into the container.
STEP no.2: Fill known amount of oil into
container. Oil must be approved
for air cooled engines at
50:1 mixing ratio. Agitate slightly
to dilute oil with gasoline.
STEP no.3: Add gasoline to obtain desired
mixture ratio (use fine mesh
screen).
STEP no.4: Replace container cap and
shake the container thoroughly.
Then using a funnel with a fine
mesh screen to prevent the entry
of water and foreign particles,
transfer mixture from container
into the fuel tank.
02058
02059
02060
02061
fig. 20
fig. 21
fig. 22
fig. 23
▲ WARNING: At refueling use only metal containers and
ground the aircraft in accordance with
the grounding specifications to avoid
electrostatic charging.
To Next Page
Loading...
Need help?
General
