d07068.fm
08 February 2024 74-20-00
Initial Issue Page 8 of 15
Copyright - BRP-Rotax GmbH & Co KG. All rights reserved.
SI-912 i-029 / SI-915 i-012
SI-916 i-007
SERVICE INSTRUCTION
1 EGT sensor cable
2 Double ignition coil cable
3 Cable tie
Fig. 3
1 Double ignition coils
2 Exhaust Gas Temperature Sensor (EGT)
Fig. 4
Step Procedure
4 Unplug the Exhaust Gas Temperature sensor (EGT). See current Maintenance Manual
Heavy (MMH), Chapter 76-50-00 Wiring harness - removal.
5 Press spring hook downwards and carefully pull the Exhaust Gas Temperature sen-
sors (cylinders 1 and 2) out of the connector bracket.
To Next Page
Loading...
