Rotax 912 i series - Page 9

d07068.fm
SI-912 i-029 / SI-915 i-012
SI-916 i-007
SERVICE INSTRUCTION
08 February 2024 74-20-00
Initial Issue Page 9 of 15
Copyright - BRP-Rotax GmbH & Co KG. All rights reserved.
1 Exhaust Gas Temperature Sensor (EGT)
2 Connector bracket
Fig. 5
1 Allen screw
2 Lock washer
3 Connector bracket
4 Clamp
Fig. 6
Step Procedure
6 Loosen Allen screws with lock washers and remove connector bracket and clamp.