Rotax 914 series User Manual

Effectivity: 914 Series BRP-Powertrain page 3-2
OM Edition 2 / Rev. 0 April 01/2010
d04475.fm
3.1) Daily checks
General note To warrant reliability and efficiency of the engine, meet and care-
fully observe all the operating and maintenance instructions.

WARNU

WARNING
Risk of burnings and scalds!
Hot engine parts!
Conduct checks on the cold engine only!

WARNU

WARNING
Non-compliance can result in serious injuries
or death!
Ignition “OFF”
Before moving the propeller switch off both ig-
nition circuits and secure the aircraft. Have
the cockpit occupied by a competent person.

WARNUNG
NOTICE
If established abnormalities (e.g. excessive
resistance of the engine, noise etc.) inspec-
tion in accordance with the relevant Mainte-
nance Manual is necessary. Do not release
the engine into service before rectification.

Rotax 914 series Specifications

General

Bore	79.5 mm
Stroke	61 mm
Compression Ratio	9.0:1
Cooling System	Liquid-cooled cylinder heads, air-cooled cylinders
Redline	5800 rpm
Engine Type	4-cylinder, 4-stroke
Fuel Type	Avgas 100LL
Oil System	Dry sump
Fuel System	fuel injection
TBO (Time Between Overhauls)	2000 hours
Displacement	1.211 liters (1211 cc)
Power Output	84.6 kW (115 hp) at 5, 800 rpm