Caution! CPR function should only be used in case of emergency to reposition the
patient in an optimal position for practicing cardiopulmonary resuscitation(CPR)
maneuvers. The use of this function for other purposes could result in serious injury to
the patient or the user.
3.9.6 Total lock
This function allows locking all the functions of the bed, except the CPR function.
Activate the total lock function as follow:
- Press on the button on the nurse control (refer to section 3.3.2) for 5 seconds. Red
light will shine from under each of the lock symbol from the nurse control.
- To deactivate this function, press again for 5 seconds on the button.
3.9.7 Light
This function turns on the light located underneath the bed.
Activate light function as follow:
- Press on the button on the nurse control (refer to section 3.3.2) to turn on or off the
light.
3.9.8 Nurse call (Optional)
This function sends a signal to the nurse’s station.
Activate the nurse call function as follow:
- Press on the button on the nurse control (refer to section 3.3.2).
3.9.9 Scale (Optional)
Refer to the booklet inserted in this manual.
To Next Page
Loading...