Rotec Versatech 1100 - Operating Conditions; Bed Moving Guidelines

5
1.5 Conditions of use
Please note that the use of this product or for it’s storage you must respect the following
indications:
Temperature of operating :
10 à 40 ˚C
Température of storage :
–40 à +70 ˚C
Relative humidity of operating :
5% à 95% (without condensation)
Relative humidity of storage:
10 à 100%
1.6 Moving specifications
Before moving the bed, it must be at the lowest position and you need to wind the
power cable around the hooks situated at the head of the bed (see p.8: power cable
support). Always use the headboard or the footboard of the bed to move it. Make sure it
is properly fixed before proceeding. Never use the side rails to move the bed.
Always manipulate the bed carefully. Apply the brakes when the bed is in place.