Technical
Manual
STEREO INTEGRATED AMPLIFIER
RA-1062
Table of Contents
Specification
Specification....................................... 1
Parts List ............................................ 2~7
Adjustment.......................................... 8
Case Outlines ..................................... 9 ~ 10
PCB Assembly ................................... 11
Schematic Diagram ............................ 12~13
r
Continuous Power Output 60 watts/channel
(20 - 20 kHz, < 0.03%, 8 ohms)
Total Harmonic Distortion (20 Hz - 20 kHz) < 0.03% at rated power, 1/2 power, or 1 watt
Intermodulation Distortion(60 Hz : 7 kHz, 4:1) < 0.03% at rated power, 1/2 power or 1 watt
Frequency Response
Phono Input
Line Level Inputs
20 Hz - 15 kHz, +/- 0.2 dB
10 Hz - 100 kHz, +l, -3dB
Damping Factor (20 - 20,000 Hz. 8 ohms) 150
Line Input Sensitivity / impedance
Phono (MM) Input Sensitivity / impedance
160 mV / 24 kOhms
2.4 mV / 47 kOhms
Line Input Overload 5 v
Phono Input Overload 170 mV
Preamplifier Output / Impedance 1 V / 470 ohms
Signal to Noise Ratio (IHF " A" weighted) >95 dB
Power Requirements USA: 115 Volts, 60 Hz
EC: 230 Volts, 50 Hz
Power Consumption 300 Watts
Dimensions (W x H x D) 430 x 92 x 355 mm
17x5
5/8
x 14 inches
Front Panel Height 80 mm / 3 inches
Weight (net) 7.8 kg, 17.2 lbs.
SHINSEN-BLD. 4F 10-10 SHINSEN-CHO, SHIBUYA-KU,
TOKYO 150-0045, JAPAN
Serial. NO.
Beginning
®
Quality Uncompromised
Y-369A0307/pdf
3/16
To Next Page
Need help?
General
