Need help?Do you have a question about the Rotel RA-1312 and is the answer not in the manual?
General| Power output | 65 watts per channel into 8Ω (stereo) |
|---|---|
| Frequency response | 10Hz - 100kHz (±1dB) |
| Total harmonic distortion | <0.05% (20Hz - 20kHz) |
| Input sensitivity | 2.2mV (MM), 150mV (line) |
| Signal to noise ratio | 75dB (MM), 95dB (line) |
| Speaker load impedance | 4Ω to 16Ω |
| Dimensions | 440 x 150 x 360mm (W x H x D) |
| Weight | 13.5kg |
To Next Page
