47User manual
Room air conditioner - TETA X
EN
PART 5. OPERATING INSTRUCTIONS
6. AUTO MODE
Automatic mode.
To set the AUTO mode, press the
button until
appears in the display.
In AUTO mode the run mode will be set automatically according to the room temperature.
7. CHILDLOCK function
1. Long press
and
button together to active this function, and do it again to deactivate
this function.
2. Under this function, no single button will active.
8. TIMER function TIMER ON
To automatic switch on the appliance.
When the unit is switch-o, you can set the TIMER ON.
To set the time of automatic switch-on as below:
1. Press
button rst time to set the switch-on,
and
will appear on the
remote display and ashes.
2. Press
or
to button to set desired Timer-on time. Each time you press the button,
the time increases/decreases by half an hour between 0 and 10 hours and by one
between 10 and 24 hours.
3. Press
button second time to conrm.
4. After Timer-on setting, set the needed mode (Cool/ Heat/ Auto/ Fan/ Dry), by press
the
button. And set the needed fan speed, by press
button. And press
or
to set the needed operation temperature.
CANCEL it by press
button.
9. TIMER function TIMER OFF
To automatic switch o the appliance.
When the unit is switch-on, you can set the TIMER OFF..
To set the time of automatic switch-o, as below:
1. Conrm the appliance is ON.
2. Press
button at rst time to set the switch-o.
Press
or
to set the needed timer.
3. Press
button at the second time to conrm.
CANCEL it by press
button.
NOTE: All programming should be operated within 5 seconds, otherwise the setting will be
cancelled.