Rotenso TM35X - Replacement of Batteries

44
User manual
Room air conditioner - TETA X
EN
No. Symbols Meaning
15. SLEEP function
16. Air purication functions
17. I FEEL function
18. 8°C heating function
19. Signal indicator
20. Gentle wind
21. Child-Lock
22. Display ON/OFF
23. Self-Clean function
24. Anti-mildew function
NOTE
The display and some functions of the remote control may vary according to the model.
3. REPLACEMENT OF BATTERIES
Remove the battery cover plate from the rear of the remote control, by pressing and sliding it in direction as
the arrow.
Install the batteries by putting ( -) at the side with spring on the remote controller. Reinstall the battery cover
by sliding it into place.
1. Use 2 pieces LRO3 AAA (1.5V) batteries.
• Do not use rechargeable batteries.
• Replace the old batteries with new ones of the same type
when the display is no longer legible.
• Do not dispose batteries as unsorted municipal waste.
Collection of such waste separately for special treatment is
necessary.
2. Each time when insert the batteries in the remote controller
for the rst time, you can set the Cooling only or Heating pump
control type.
As soon as you insert the batteries, turn o the remote controller,
and operate as below.
1. Long press the button, until the ( ) icon ash, to set the Cooling only type.
2. Long press the button, until the ( ) icon ash, to set the Heating pump type
PART 4. REMOTE CONTROL