Need help?Do you have a question about the Rotex GW and is the answer not in the manual?
General| Type | Gas Condensing Boiler |
|---|---|
| Fuel Type | Gas |
| Heating Capacity | 25 kW - 48 kW |
| Fuel | Natural Gas |
| Weight | 45 kg - 55 kg |
| Dimensions | 700 x 400 x 300 mm (H x W x D) |
| Operating Pressure | Up to 3 bar |
Detailed safety instructions for working on the heating system, electrical installation, room, water, fuel, operation, and owner instruction.
Details on installations where the unit draws combustion air from outside.
General instructions and safety requirements for flue gas systems.
General safety and operational information for hydraulic connections.
Safety warnings and instructions for electrical connections.
Instructions for connecting the gas line and checking burner settings.
Steps to verify and adjust the burner's pre-set gas type and pressure.
Procedures for putting the ROTEX GW into operation, including requirements and checks.
Overview of the controller's LCD display and buttons.
Introduction to the different operating modes of the ROTEX GW.
Detailed list of settable parameters, their levels, settings, and explanations.
Procedures for unlocking the burner after a fault shutdown.
General instructions and tables for setting the burner for different gas types.
Procedures for basic burner setting and changing gas types.
How to adjust burner output limits and starting output for optimal performance.
Instructions for setting gas pressure controller, electrodes, and dismantling the burner.
Procedures and warnings for installing the burner assembly.
Table listing malfunctions, possible causes, and solutions.
Table detailing fault codes, component designations, and associated faults.
To Next Page
