Roto Safe - Page 31

6. Secure the plug connection with a screw [3].
3
7. Check that the cable junction is working properly
 from page 35.
INFO
Do not exceed the technical values
(voltage, current, power).
INFO
Only an electrician may connect the frame component with built-in power supply unit (mat. no. 817028) to
the 230 V power supply.
DANGER
Risk of death caused by electric shock!
Current can lead to fatal injuries.
u
Take extra care when handling live components.
u
Only an electrician may connect the power supply unit to the mains voltage.
u
Observe and comply with the respective national regulations (in Germany VDE 0100 and others).
Installation
Installation
Subject to change. Roto Safe - Cable junctions
IMO_502_EN_v2 · 05 / 2020 · 31