Roto Safe - Operation; Fault assistance; Performance test

6 Operation
6.1 Fault assistance
Fault Cause Corrective action To be carried out by
No power supply. Loose plug connection. Plug in the connector so that it is secure.
Check the power supply (LED must be lit).
■
Cable breakage. Replace the cable. ■
No power connection. Check the plug connections.
Check the power supply (LED must be lit).
Check the power supply unit.
■
■ = Must be carried out by a specialist company
6.2 Performance test
1. Check the power supply at the power supply unit.
 LED is lit up green when there is voltage.
2. When the door is installed, test the electrical multipoint locking system and any access control systems that are
fitted.
Operation
Subject to change. Roto Safe - Cable junctions
IMO_502_EN_v2 · 05 / 2020 · 35