7 Maintenance
CAUTION
Performing maintenance work incorrectly can lead to injuries.
Performing maintenance incorrectly can lead to injuries.
u
Ensure that there is sufficient space for installation before starting work.
u
Ensure that the installation site is clean and tidy.
u
Always have hardware adjustment and replacement work performed by a specialist company.
u
Secure the sash against unintentionally opening or closing.
u
Do not unhinge the sash for maintenance.
ATTENTION
Incorrect or improper testing may cause property damage.
Incorrect or improper testing of the hardware may cause the element to malfunction.
u
Have the hardware checked by a specialist company when installed.
u
If defects need to be remedied, have the element unhinged and remounted by a specialist company.
INFO
The manufacturer must draw the attention of builders and end consumers to these maintenance instruc-
tions.
Roto Frank Fenster- und Türtechnologie GmbH recommends the manufacturer conclude a maintenance
agreement with their end users.
No legal claims can be derived from the following recommendations; their application is to be based on the specific
individual case.
Responsibility
Maintenance interval □
from page 37
Cleaning
from page 37
Clean hardware □
Care
Lubricate movable parts □
Lubricate locking points □
Performance test
from page 37
Check that hardware components are fitted securely □
Inspect hardware components for wear □
Check that movable parts work properly □
Check that locking points work properly □
Check ease of movement ■
Repair
from page 39
Retighten screws ■
Replace damaged components ■
□ = May be carried out by a specialist company or the end user
■ = Must be carried out by a specialist company
Maintenance
36 · 05 / 2020 · IMO_502_EN_v2
Roto Safe - Cable junctions Subject to change.
To Next Page