When you start your
car's engine for the next
time, the dash cam will
give you an alert stating
that the "Parking Mode
Got Activated While
You Were Away"
(You will hear an
audible alert & also an
on-screen pop-up).
5
6
7
8
You will need to tap the OK button on the screen to
acknowledge that pop-up. Then you can check and see what
happened by going through the last event video.
However, let's say No One hits your car, and if the "Parking
Mode G-Sensor" didn't get activated, you will NOT get any
parking mode alert. >> In this case, when you start your car's
engine for the next time, the dash cam will switch from
parking mode to normal continuous recording mode, and it
will say "recording started" >> and the "Parking Mode +
Time-Lapse" icons form the main screen will also disappear.
This means your dash cam is now in normal continuous
recording mode, which is what you want.
If you need to watch the parking mode Time-Lapse Videos,
you will find them under the normal folder. Time-Lapse
videos are not meant to be locked.
NOTE:
In time-lapse + Collision Detection parking mode, the LCD is designed to
turn OFF automatically after 5-6 seconds. You can wake up the LCD by
gently touching it. While the LCD is OFF in the parking mode, you will see
BLINKING BLUE LED, which means the dash cam is recording the video.
54
USER MANUAL
To Next Page
Loading...
