ROVE R3 - Page 59

0.0 Auto (Default)
-2.0, -1.7, -1.3, -1.0, -0.7, -0.3, 0.0 (Auto), +0.3, +0.7, +1.0, +1.3, +1.7, +2.2
•
•
•
EXPOSURE
Exposure allows you to manually adjust the light sensitivity ISO
of the image. We recommend that you leave it at “0.0 Auto” so
the camera can adjust exposure automatically. However, you
can also manually set your exposure. Higher the exposure
brighter the image.
ROVE offers a vast range of exposure levels in its R3 dashcam.
The exposure setting allows you to adjust the dashcams’
brightness level according to the background. Increased
exposure results in brighter footage in a dark location, whereas
low-exposure settings produce actual footage in an overexposed
place without the worry of excessive lighting ruining your
valuable footage. This feature is very beneficial when involved
in a mishap in a varied brightness area.
WDR
WDR - Wide Dynamic Range - This feature produces a wider
range of colors and lighting in a single robust image from either
too bright (i.e. driving towards direct sunlight) and dark light
(i.e. cloudy or evening drive).
OFF
ON (Default)
•
•
59