This feature was not added until the last update of our NEW
Rove Dash Cam APP.
WHY CAN'T I CHANGE THE WIFI SSID AND PASSWORD?
Please update the APP on your smartphone. This will allow
you to change the WiFi SSID & Password accordingly by going
to the app's Settings menu.
9
There could be two scenarios:
Your camera has the old firmware version installed which
doesn't have the separate settings for Parking Mode
G-Sensor yet and the G-sensor was set to Low Impact by
default.
The Parking Mode G-sensor is set to low impact detection.
WHY DOES R3'S PARKING MODE GETS TRIGGERED
AS THE CAR'S DOOR FORCE SLAMS?
10
1.
2.
Update your R3 dash cam easily and remotely using the
new ROVE App to have the recent firmware update.
Make sure to set the Parking Mode G-sensor feature
accordingly so it will not give you a false positive alarm
because of too much sensitivity. A slight impact like
closing/opening doors or a small bump will trigger the
1.
2.
85
To Next Page
Loading...
