Symphony - Radio
153
3
8. Scan mode button
Press to scan through all frequencies on the chosen waveband
(each radio station will be played for 5 seconds). Press again to
cancel the scan. See ‘Waveband scan’, page 157.
9. Traffic and news information
Press briefly to switch on (or switch off) Traffic information mode
- FM waveband only (see ‘Selecting traffic information’, page 160).
Press and hold for 2 seconds to switch on (or switch off) News
mode - FM waveband only (see ‘Selecting news information’,
page 160).
Press briefly to return to normal radio, tape or CD reception
during a traffic or news announcement.
NOTE: Both traffic and news information can be operational at the same
time.
To Next Page
Loading...
