Symphony - Cassette Player
155
3
Skip: With the unit in automatic mode, press the appropriate
search button to skip to either the beginning of the next track, or
the beginning of the current track (‘SEEK’, and chevrons
indicating the direction of tape movement, appear in the display).
To select automatic mode (or return to manual mode), press the
manual button (6) located between the two tape search controls -
the ‘MAN’ indicator in the display extinguishes.
NOTE: The skip function may not find spaces between tracks of less than
three seconds duration, and also may be confused by excessive background
noise, very soft musical passages and intermittent pauses in music or speech.
NOTE: The skip function can also be controlled using the remote switches
on the steering wheel (see ‘Remote audio controls’).
15. Dolby
1
B-type noise reduction
Press pre-set 1 when playing tapes recorded using Dolby B NR,
the display shows ‘DD’.
16. Tape scan button
Press the SCAN button to listen to the first 10 seconds of each
track on the tape (both sides). The display shows ‘TAPE SCAN’.
The scan continues until the button is pressed again or until
another function is selected.
1. Noise reduction manufactured under license. Dolby and the double-D symbol are
trade marks of Dolby Laboratories Licensing Corporation.
To Next Page
Loading...
