Bulb Replacement
243
5
FRONT DIRECTION INDICATORS (oval-shaped)
Replacement bulb: 21 watt (amber).
Using hand pressure, push the bottom of the outboard corner of
the lens very firmly towards the REAR of the car; at the same
time, push the inboard side of the lens firmly towards the SIDE of
the car. This will disengage the securing spring and enable the light
unit to be pulled from the front of the bumper.
Alternatively, use a flat-bladed screwdriver to carefully lever the
inboard side of the light unit from the bumper aperture.
Twist the bulb holder a quarter turn anti-clockwise to release it
from the light unit. Push and twist the bulb one eighth of a turn to
release.
When replacing the light unit, insert the outboard side first (nearest
the side of the car), then carefully ease the inboard side of the light
into the aperture. Be sure it ‘clicks’ securely into position.
H2702
To Next Page
Loading...
