244
Bulb Replacement
FRONT DIRECTION INDICATORS (circular type)
Replacement bulb: 21 watt (amber).
To access the light unit, the small panel immediately below the
relevant light must be removed from the underside of the car. This
is held in place by five Philips type screws, which must be removed
before the panel can be released (see illustration for location of the
five screws).
Detach the electrical connector from the rear of the bulb holder by
squeezing the clips on both sides of the connector and pulling the
connector away from the light unit.
Twist the bulb holder a quarter turn anti-clockwise to release it
from the light unit. Push and twist the bulb one eighth of a turn to
release.
HB0299
HB0300
To Next Page
Loading...
