To Next PageTo Next PageWhy does my Royal Cash Register not work at all?
Your Royal Cash Register might not be working because it is not plugged into a working electrical outlet or another electrical device is using the same power source. Be sure it is plugged into a working outlet and no other electrical device is using the same power source. As a last resort, you can perform a Master Reset or a Partial Reset.
How to open the cash drawer of Royal ts1200mw when there is no power?
To open the cash drawer of your Royal Cash Register when there is no power: 1. Insert the key labeled 777 and turn it to the left. 2. Carefully tip the front of the register up with both hands on the cash drawer. Locate the small lever underneath the cash register, toward the back. 3. Push the lever in the only direction it will move.
What to do if my Royal Cash Register prints 'Power Interrupted Error' on the receipt printer?
If the 'Power Interrupted Error' prints on the receipt printer of your Royal Cash Register, return the control lock key to Register mode and complete the transaction with the method of payment, such as cash, check, or charge.
How to fix paper end or other printer errors on Royal ts1200mw?
To resolve paper end or other printer errors on your Royal Cash Register: * Check if you are out of paper and replace it with a new roll if needed. * Check for a paper jam and carefully remove any obstructing paper. * Ensure the paper is aligned properly in the printer and the printer handle is in the locked position. After resolving the paper issue, press the return key. If the error persists, unplug the cash register, wait 10 seconds, and plug it back in.
What to do for Electronic Journal Memory Errors on Royal Cash Register?
To prevent Electronic Journal Memory Errors on your Royal Cash Register, check the Electronic Journal occasionally to see if you need to run the EJ report. Immediately after the current transaction is finished, either print the Electronic Journal record in Z Mode or manually clear the Electronic Journal record memory.
General| Departments | 24 |
|---|---|
| Printer | Thermal |
| Paper Width | 58mm |
| Display Type | LCD |
| Display | LCD |
| Power Source | AC |
Guides users through initial setup and essential information.
Outlines the initial steps for setting up the cash register.
Configuration steps for setting up sales tax rates for transactions.
Procedure for selecting between Restaurant and Retail operational modes.
Configuration for managing clerk accounts and monitoring sales.
Setting security passcodes for accessing reports and programming.
Guide for setting up and organizing merchandise departments.
Configuring tax settings for individual departments.
Setting up Price Look-Up (PLU) items with descriptions and prices.
Instructions to ensure the register is configured for restaurant operations.
Guidance on selecting and programming US sales tax methods.
Procedure to choose and program up to four different tax rates.
Procedure for establishing communication between the register and a computer.
Steps to take when the cash register fails to power on or operate.
Technical specifications and important safety guidelines for the product.
Regulatory information, FCC compliance, and safety warnings.
