12
GEAR SHIFTING
Reduce throttle before shifting. Never increase the throttle while
shifting gears.
Pull in the clutch lever, located on the left hand grip.
Depress the Shift lever to place the gear in 1st, lift up the lever to shift
to 2nd, 3rd, 4th and 5th.
Do not place your foot on the gear-shifting pedal while operating the
motorcycle to avoid clutch damage caused by accidental gear shifting.
Shifting sequence
(1) 1st gear
(N) Neutral
(2) 2nd gear
(3) 3rd gear
(4) 4th gear
(5) 5th gear
Points for Attention during Drive
1. To warm the engine let engine idle. Do not rev the engine to prevent damage to the engine components.
2. The clutch will wear out quickly if the motorcycle is operated with the clutch in a semi-engaged position.
3. Shift to the low speed gears when you feel that there is insufficient power to climb hills or continue
forward.
4. Do not use the front brake only or coast using the neutral gear especially when descending or driving at
a high speed.
5. Decrease the throttle when braking.
To Next Page
Loading...
Need help?
General
