18
Maintenance
˙
Do not attempt to repair this meter. It contains no userserviceable parts.
Repair or servicing should only be performed by qualified personal.
˙
Failure to observe this precaution can result in injury and can damage the
meter.
Cleaning and storage
Periodically wipe the housing with a damp cloth and mild detergent. Dirt or
moisture in the terminals can affect readings.
If the meter is not to be used for a long period, more than 60 days, remove the
battery and store it separately.
Caution
˙ Use ONLY a fuse with the amperage,
interrupt, voltage, and speed rating
specified.
˙ Fuse rating : 10A, 600V, high energy
fuse.
10x38 mm Fast Acting,
Ferraz G330010 (RS 188-
7971) or equvilent.
Fuse Replacement (Not IDM 71)
Refer to the following figure to replace fuse :
Caution
Maintenance
To Next Page
Loading...
