7
Introduction
Unpacking and Inspection
Upon removing your new Digital Multimeter from its packing, you should have the
following items.
1. Digital Multimeter.
2. Test lead set (one black, on red)
3. User Manual.
4. Protective holster.
Environmental
Conditions
This product is safe at least under the following conditions:
1. Indoor Use
2. Altitude up to 2000 Meter
3. Operating Temperature and Relative Humidity :
Non-condensing ≦10°C ,11°C ~ 30°C (≦80% R.H)
31°C ~ 40°C (≦75% R.H), 41°C ~ 50°C (≦45% R.H),
4. Storage Temperature and Relative Humidity : -20°C ~ 60°C (0 ~ 80% R.H)
when battery removed from Meter.
5. Pollution degree 2
6. Installation category :
The standard 70 series models meet the requirements for double insulation to
IEC 61010-(2001), EN61010 (2001), UL3111-1(6.1994), CSA C22.2
NO.1010-1-92 to terminals:
V/Ω/µA IDM 71,72 and 73 : Cat. Ⅳ 600 Volts.
A IDM 72 and 73 only : Cat. Ⅳ 600 Volts.
7. Shock Vibration : Sinusoidal vibration per Mil-T-28800E (5 ~55 Hz, 3g maximum).
8. Drop Protection : 4 feet drop to hardwood on concrete floor.
Introduction
To Next Page
Loading...
