2
General
Safety
Summary
Please
review
the
following
safety
precautions
carefully
to
avoid
personal injury or damage to this product or any product connected
to
it.
To
prevent
potential
danger,
please
use
the
instrument
as
specified.
Use
proper
power
cord
Only the power cord designed for the instrument and authorized by
local country could be used.
Power
supply
AC Input Voltages: 100V/110V/220V/230V ±10%, 50/60Hz.
Use
proper
fuse
The fuse types: 100V/110V(T6.3A/250V) 220V/230V
(T3.15A/250V)
Make
sure
to
use
the
correct
type
of
fuse
before
turning
on
the
instrument.
Do not connect the power cord before replacing the fuse.
Find
out
the
reason
why the
fuse
burned
out
before
replacing the
fuse.
Ground
the
instrument
The instrument is
grounded through the protective terra conductor
of the power cord. To avoid electric shock, the grounding conductor
must
be
connected
to
the
earth.
Make
sure
that
the
instrument
is
properly grounded before any inputs or outputs.
Observe
all
terminal
ratings
To
avoid
fire
or
electric
shock,
please
observe
all
ratings
and
symbols on the instrument. Read this guide carefully to know more
details about the ratings before connection.
To Next Page
Loading...
