RS PRO RSPD3303C - Product Specifications - Output & Performance; Output Ratings and Modes; Constant Voltage Mode Specifications; Constant Current Mode Specifications

30
Specification
Test conditions: warm-up for about 30minitus, with temperature
between +20℃~+30℃.
Output
Ratings
Constant
CH1/CH2 independent 0～30V , 0～3A
CH1/CH2 series 0～60V , 0～3A
CH1/CH2 parallel 0～30V , 0～6A
CH3 2.5V/3.3V/5.0V , 0～3A
power change rate ≤0.01%+3mV
Voltage Mode Load change rate ≤0.01%+3mV(rating current ≤ 3A)
Constant
≤0.02%+5mV(rating current ＞ 3A)
Ripple and noise ≤2mVrms（5Hz ～ 1MHz）
Recover time ≤100μs(50% load change ,minimum
load 0.5A)
Temperature coefficient ≤300ppm/℃
Power change rate ≤0.2%+3mA
Current Mode Load change rate ≤0.2%+3mA
CH3
Tracking
Operation
Ripple and noise ≤3mArms
Power change rate ≤5mV
Load change rate ≤15mV
Ripple and noise ≤2mVrms（5Hz ～ 1MHz）
Track error ≤0.5%+10mV of Master(No Load)
Parallel Mode Power change rate ≤0.01%+3mV
Series Mode
Resolution
Display
Accuracy
Load change rate ≤0.01%+3mV(rating current≤3A)
≤0.02%+5mV(rating current＞3A)
Power change rate ≤ 0.01%+5mV
Load change rate ≤ 300mV
Voltage Voltage: 10mV
Current Current: 10mA
Ammeter 3.2A full scale, 3 digits LED display
Voltmeter 32V full scale, 4 digits LED display
Set precision Voltage：±（0.5% of reading + 1digit）
Current：± (0.5% of reading + 1digit)
Readback precision Voltage：±（0.5% of reading + 1digit）
Current：± (0.5% of reading + 1digit)
Insulation
Between base and
terminal
Between base and AC
power cord
20MΩor above (DC 500V)
30MΩor above (DC 500V)