RS PRO RSPD3303C - Chapter 1 Quick Guide: Initial Setup; General Inspection Procedure

6
Chapter 1 Quick Guide
In this chapter, we mainly introduce the panel display interface
and inspecting the new machine. Reading the following steps will
give you a quick understanding on operation.
General Inspection
1. Inspect the shipping container.
Keep the damaged shipping container or cushioning material
until the contents of the shipment have been completely
checked and the instrument has passed both electrical and
mechanical tests.
2. Inspect the instrument.
If there are instruments found damaged, defective or failure in
electrical and mechanical tests, please contact us.
3. Check the accessories.
Please check the accessories according to the packing list. If the
accessories are incomplete or damaged, please contact us
.