Picture 4.24 Fixing the Shrouds
Picture 4.25 Rigging the Jib Halyard Block
Now step the mast, following the instructions in Section 4.4 –
Stepping the Mast.
Once the mast is stepped in the boat, you can attach the shrouds to the shroud
adjuster plates. A good setting to start with is with the pins in the third hole down on
Shrouds
Shroud Shackle
Jib Halyard
Block Tie
Jib Halyard
Block Tie
Jib Halyard
Block
Jib Halyard
To Next Page
Loading...
