RSP Compact Series - Page 14

14 M0416-1 version 3.2
Lubricate locking balls
Apply a small amount of
grease (Molykote
BR2Plus) on the locking
balls.
NOTE! It is important that
this is done or else there is
a risk that the tool
attachment jams.
Clean air sealings
Wipe air sealings clean
with a lint free cloth.
Clean spring-loaded signal pins (electrical versions
only)
Clean the contact surfaces
of the spring-loaded signal
pins with a nylon brush.
NOTE!
Signal pins shall be
cleaned whenever
blackened.