RSP Compact Series - Replacement of Wear Parts; Replacement of Air Sealing; Replacement of O-Ring

18 M0416-1 version 3.2
4.3 Replacement of wear parts
4.3.1 Replacement of air sealing
Action
Note
1
Remove air sealing
Remove the air sealings with a
screwdriver.
2
Wipe clean the sealing holes.
Remove all remaining parts of the
sealing.
3
Mount new air sealings
Tap in the air sealings with a
plastic mallet.
4.3.2 Replacement of O-ring
Action
Note
1
Remove O-ring
.
Remove the O-ring on the ball
holder at the tool changer
2
Clean surface
Clean the surface at the O-ring
location.
3
Add grease
Add a small amount of grease
(Magnalube-G) on the new O-ring
4
Mount new O-ring.