AUDIO DISTRIBUTION
Technical Support: support@rticontrol.com - Customer Service: custserv@rticontrol.com 36
Option Description
Power Button
The feature manages access to the front panel power button that can be used to
allow/disallow the use of this button to control the on and o, or standby, states
of the matrix.
• Enabled: Allows access to the front panel power button. When enabled,
power can be managed by the front panel button and API commands.
• Disabled: Disallows access to the front panel power button. When disabled,
power can only be managed by API commands.
ECO Mode
The ECO mode feature can be enabled and will put the matrix in a completely
OFF state when the matrix is turned o. When this feature is disabled, the matrix
will be put into a normal standby state that powers down major aspects of the
matrix but leaves the TCP/IP and other control interfaces energized when the
matrix is turned o. When ECO mode is disabled, the standby state ensures
a quicker start-up time in comparison to the ECO mode enabled state. Please
note that matrix will consume more power when this feature is disabled, and the
matrix is powered o than when this feature is enabled.
Audio Sense
The audio sense feature will automatically power on the matrix when any source
audio signal is detected.
• Enabled: Audio sense is enabled and will. Power on the matrix when audio is
sensed on any of the source inputs.
• Disabled: Audio sense is ignored, and the matrix can only be powered on
using the power button or API commands.
Standby
The standby feature will turn the unit o (please see the ECO mode above for the
power state when placed into standby) after 15 minutes have elapsed without
any audio being detected on any inputs.
Firmware
This section of the congure page is dedicated to managing the hardware and
software rmware for the matrix. The current version is noted.
• Choose File: Clicking on this button will open a dialog box to select a rmware
le. Once selected, a submit button will appear.
• Submit – Once the submit button is pressed, the unit will begin the rmware
update process which can take up to 5 minutes.
Reboot/Reset
Settings
Use options in this section to reboot or reset dierent aspects of the matrix.
Options include:
• Reboot: Use this button to reboot the matrix. This will not change or reset any
functions or features of the matrix and current settings are retained through
a reboot process.
To Next Page
Loading...