AUDIO DISTRIBUTION
37
www.rticontrol.com
GUI Elements Description / Options
Reboot/Reset
Settings
• Reset Users: Use this button to reset all saved users and their access levels
and revert to the factory default admin account only.
• Reset Network: Use this button to factory reset the network settings. The
default for the network uses the DHCP addressing method.
• Factory Reset: Use this button to return the unit to its factory default settings.
Please note that this is a complete reset of all features, functions, users, and
network settings. This process cannot be undone.
Network Settings
Use these settings to set the network addressing method, along with their
relevant settings. Changing settings in this section will aect the IP address that
hosts this web interface, as well as the IP address that is used by external devices
that use the TCP/IP interface for control of this unit via API commands. A reboot
is necessary for these changes to take eect.
• DHCP: This is the default IP addressing method. This requires a DHCP server
to be available on the same network that the matrix is connected to. If a
DHCP server is not available, the matrix will assign its own random address.
• Static IP: When this IP addressing method is selected, the user must input the
IP address, subnet address, and gateway address that is needed to operate
on a private network segment. Please review and note all settings before
saving as an incorrect or forgotten setting will make access and/or recovery
to the matrix’s GUI or control interfaces dicult to achieve.
Users
The Users section is provided that will allow the addition of multiple user
accounts that can have access to either the operational or administrative
features of this matrix.
Device Logs
Device logs capture information and events that are useful when troubleshooting
issues.
To Next Page
Loading...