RTK ST 5112-32 User Manual

Einbau- und Betriebsanleitung
Installation and Operating instructions
Instructions de montage et de service
Elektrischer Stellantrieb
Electric Actuator
Servomoteur électrique
5112-8010
Baureihe / Series / Séries
ST 5112
10/2012
Inhaltsverzeichnis
Seite
1 Aufbau auf Armaturen 2
2 Elektrischer Anschluß 2
3 Handbetätigung 2
4 Probelauf 2
5 Einstellung 2
6 Heizung 3
7 Austausch von Bauteilen 4
8 Wartung, Instandhaltung 4
Content
page
1 Fitting onto valves 5
2 Electrical connection 5
3 Manual operation 5
4 Trial operation 5
5 Settings for Actuator 5
6 Heating 6
7 Replacement of components 7
8 Maintenance, repair 7
Index
page
1 Installation sur les vannes 8
2 Connexions électriques 8
3 Commande manuelle 8
4 Contrôle démarrage 8
5 Réglages 8
6 Chauffage 9
7 Remplacement des composants 10
8 Maintenance et entretien 10
Anhang / Appendix/Annexe
1 Technische Daten / Technical data /
Caractéristique techniques 11
2 Elektrischer Anschlußplan / Terminal connection /
schéma de cablage 12
3 Komponenten /components 13
4 Ersatzteilliste / spare parts list / liste de rechange 14

RTK ST 5112-32 Specifications

General

Brand	RTK
Model	ST 5112-32
Category	Controller
Language	English

Summary

Fitting onto valves

Electrical connection

Manual operation

Trial operation

Settings for Actuator

Force switch setting

Factory setting for force switch, adjustment not required.

Setting the limit switches

Procedure for setting the travel limit switches for open and closed positions.

Setting additional limit switches

Used for signaling arbitrary intermediate positions.

Potentiometer adjustment

Procedure for adjusting the potentiometer for output signal calibration.

Electronic positioner adjustment

Refer to separate operating instructions for positioner adjustment.

Heating

Replacement of components

Replacement of the motor p.c.b.

Procedure for replacing the motor printed circuit board.

Motor capacitor replacement

Procedure for replacing the motor capacitor.

Replacement of the motor

Procedure for replacing the motor.

Maintenance, repair

Technical specification

Terminal connection

Components

Spare parts list

CE Declaration of conformity