10. Video Check
11. Limit Mode - Hold down assigned button, turn the knob to whichever two points you like,
release. Limits will now be set so the full rotation of the knob will be between the
manually set points. To clear this limit simply hold down the assigned button for 3 secs.
12. ISO Increment (BETA)
13. ISO Decrease (BETA)
14. 2nd function - Some functions have the option to set as a ‘second function’ When the
configured button is held down the knob will change to whichever 2nd function has been
assigned (BETA)
To Next Page
Loading...