RTMOTION LCS MK3.1 - Controller MK3.1

5 Controller MK3.1
The Controller MK3.1 gives from 4 to 6 axis control.


Note: Picture shows MK3.1/Z variant (with Force-Zoom Joystick).

Variants
MK3.1/S, “Slider”. 4 AXIS CONTROL
Large Focus Knob + Slider + 2x Side Knobs (A/B).
MK3.1/Z, “Force-Zoom”. 6 AXIS CONTROL
Large Focus Knob + Slider + 2x Side Knobs (A/B) + Force Joystick (X/Y).
Configurations
Any INPUT (Large knob, Side Knob A, etc.) can be assigned to any LENS AXIS.
For example, an MK3.1/S Controller can be configured so that the MAIN KNOB controls Focus,              
SLIDER controls Iris, and SIDE KNOB A controls Zoom.
All variants are capable of simultaneously controlling at least 4 axis, so are effectively “FIZ” and               
“3D” capable.
There are however significant ergonomic advantages to industry standard controls, so for fine            
control it is recommended that the Force Joystick is used for Zoom, and the Slider is used for IRIS.