RTMOTION LCS MK3.1 - Sizes & Weights

5
GPIO

PWR-OUT Socket — LM 2-pin 0B
1
GND
2
Power Out – Pass-through directly from PWR-IN.

Sizes & Weights
PART
APPROX SIZE
APPROX WEIGHT
Controller MK31
140x70x31mm (ex. knob).
155x110x75mm (inc. knob and
antenna).
576g (ex battery and
marking disc).
Receiver MK31
100 x 30 x 23mm (inc. antenna
cap).
118g
Motor MK31
115x40x24mm (ex. gear).
212g (with gear).

Note: These weights are guidelines only- batch variation, incremental improvements and attempts to trim down              
weight could all result in small variations to numbers quoted.
Visit our website for a more up to date list.
 