Ruide Disteo 23 - Table of Contents

2
MENU
1. PRECAUTIONS........................................................................ 1
2. PART NAMES........................................................................... 3
3. OPERATION ............................................................................. 4
3.1 Keys ............................................................................ 4
3.2 Abbreviation ................................................................ 5
4. ANGLE MEDASUREMENT ...................................................... 5
4.1 Angle .......................................................................... 5
4.2 HSet ............................................................................ 6
5. DISTANCE MEASUREMENT ................................................... 6
5.1 Distance ...................................................................... 6
5.2 Stake Out (S.O.) ......................................................... 7
5.3 Mode ........................................................................... 7
6. AXES STAKE-OUT ................................................................... 8
6.1 Stake Out of One Side on the Axes ............................ 8
6.2 Stake Out of Any Point ............................................... 9
7. QUICK SETTING.................................................................... 10
7.1 Laser Plummet ......................................................... 10
7.2 Laser Pointer ............................................................ 11
7.3 Compensation on X .................................................. 11
7.4 Distance Setting ....................................................... 11
7.5 Backlight and Sound ................................................. 11
8. SETTING................................................................................. 12
8.1 Unit ............................................................................ 12
8.2 Angle ......................................................................... 12
8.3 Distance .................................................................... 12
8.4 PPM .......................................................................... 12
8.5 Power ........................................................................ 13
9. CALIBRATION ........................................................................ 13
9.1 Calibrate i Angle ........................................................ 13
9.2 Correction of Additive Constant ................................. 14
10. INFORMATION ................................................................... 15
10.1 Firmware Upgrade .................................................... 15
10.2 Factory Mode ............................................................ 16
10.3 System Information ................................................... 16
11. SPECIFICATION ................................................................ 17
12. ERROR CODE ................................................................... 18